Designwall Matrix This is where steel reveals its enormous diversity. Smooth, flat surfaces accompanied with impressive line management in the joints along with variable dimensions and an almost unlimited colour range. Realise your creative ideas with Designwall Matrix and develop sustainable, standard-setting projects.
Safety and energy efficiency are top priorities for Designwall Matrix. The available insulating core, non-combustible mineral wool is FM certified.
Galvanized Steel with a minimum yield strength of 280 MPa. The standard gauge is 0.75mm on the external and 0.50mm (0.75mm if structural required) on the internal side. Other steel options available on request.
The panels feature a flat surface on both sides. On request a slightly profiled internal facing is available.
External weather Sheet: Kingspan Spectrum®, 50 μm polyurethane coated semi-gloss finish with a slight granular effect. Kingspan Spectrum® offers outstanding durability and weather resistance performance, excellent corrosion and UV-resistance as well as high colour and gloss retention. Its superior flexibility provides high resistance
against mechanical damage. Available in a wide range of solid and metallic colours, Kingspan Spectrum® is free of chlorine, phthalates, plasticizers and is 100% recyclable.
Internal Liner Sheet: Polyester coating with a nominal thickness of 25 μm. The standard colour is grey white, (similar RAL 9002). Further coating options are available on request.
The panels are equipped with a protection film on both sides.
Mineral fibre lamella insulation with a density of 120 kg/m³.
The system features impragnated sealing tapes to maximize thermal
efficiency and create a double barrier against air and water penetration.
Thermal performance according EN 14509
|Panel Thickness||Mineral fibre core λ=0,045 W/mK|
|U-Value (W/m²K)||R-Value (m²K/W)|
Matrix panels are immune to attack from mould,fungi,
mildew and vermin. No urea formaldehyde is used in the construction
and the panels are non-deleterious.
REACTION TO FIRE
Matrix panels have been tested and approved and
comply with national building regulations and standards. The panels
are classified as A2-s1,d0 according EN 13501-1.
According to EN 1365 - Fire resistance tests for loadbearing elements
Matrix panels achieve
EI90 for a panel thickness ≥ 120 mm
For more Information on fire resistance performance, please contact
Kingspan Benchmark Technical Department.
Please contact Kingspan Benchmark Technical Department for detailed
load span tables and structural design services.
Depending on the panel thickness, the single figure weighted sound
reduction Rw of Matrix panels ranges between 28 and
Matrix elements are stacked horizontally, with weather sheet upward. Removable hot melt adhesive is laid between each panel. The top, bottom, sides and ends are protected with polystyrene and timber packing and the entire pack is wrapped in polyethylene. The number of panels in each pack depends on panel length and
weight. Typical pack height is 1100mm. Maximum pack weight 1500kg.
Kingspan Total Benchmark Guarantee
All systems are available with the Total Benchmark Guarantee, offering thermal and structural performance guarantee.